Minibar Systems SMARTCUBE SC-40T User Manual page 30

User Manual
Adjust both the SmartCube
and the GuestFridge unit's
locations to align with the
center of the case good and
then fix the units onto the
casegood using two screws.
To mount the units to case
good, open doors and the
bracket is located on the
bottom lip of the cold cube.
Screws(MB-NP-0026) packed
in accessory back along with
the bracket.
Casegood ventilation is
emparative to unit function
and optimal operation. Leave
a minimum of 2 inch
clearance between the wall
and case good so that hot air
can be properly vernilated to
the outside away from the
case good.
*case good doors optional
2021
In
Page 30