Secondary Laser Emulation; Laser Emulation Transmission Rate - Hand Held Products 3800i User Manual

Secondary Laser Emulation

Use this selection when connecting to a secondary terminal with integral
decoding. This also sets the transmission rate to 36 scans per second, the
polarity to white high, and deletes all prefixes and suffixes.
When you scan the following bar code, the imager sends the raw data edges to
the host for host decoding. This also sets the transmission rate to 36 scans per
second and the polarity to white high.
When you scan the following bar code, the scanner decodes and re-encodes the
data and sends the data to the host as Code 39.

Laser Emulation Transmission Rate

The transmission rate is limited by the terminal's ability to receive data without
dropping characters. Default = 36 scans/second.
3800i/3800r User's Guide
* Laser Emulation
Same Code Output
Laser Emulation
Raw Output
Laser Emulation
Code 39 Output
* 36
100
6 - 3