Upc E0 Number System; Upc E0 Addenda; Ean/Jan 13 - Hand Held Products 3800i User Manual

UPC E0 Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On

UPC E0 Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC E data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On

EAN/JAN 13

EAN/JAN 13
* On
7 - 22
<Default All EAN/JAN Settings>
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
Off
3800i/3800r User's Guide