Cisco 7513 Quick Start Manual page 9

Install the Hardware
Attach the Chassis Ears
POW ER
A
Step 1
Position the ears on the chassis as follows:
• To flush-mount the chassis, place each ear so
that the mounting strips are flush with the end of
the chassis, and align the mounting holes in the
ear with those in the chassis.
• To center-mount the chassis, place each ear with
the mounting strips away from the end of the
chassis, and align the mounting holes in the ear
with those in the chassis.
Center-mount position
Flush-mount position
POW ER
B
Step 2
Use two M4 x 10-mm LG Phillips
flat-head screws to secure each ear to the
chassis.
7