Avantco EX SUPER Instruction Manual

with the purpose to keep the equipment best opera ng
condi ons, therefore increasing the equipment life and
safety.
* Cleaning – check item 5. CLEANING
* Wiring - Check all wires regarding deteriorate condi ons
as well as all electric contacts (terminals) regarding
ghtening and corrosion .
*Contacts – ON/OFF switches, emergency bu on, reset
bu on , electronic circuits etc., check the equipment in
order to assure that all components are correctly working
and the equipment opera on is normal .
* Installa on – make sure the installa on followed item 2
instruc ons.
1 - Each month check :
- Check the electrical installa on
- Measure the voltage at the socket
- Measure the working current and match it with the
nominal current
- Check the ghtening of all electric terminals to avoid bad
contacts
- Check electric motor sha clearance
7. ELECTRIC DIAGRAM
ON/OFF SWITCH
- Check the wiring for overea ng, insula on failures and
mechanical damages .
2 - Each three month checks
- Check electrical components such as ON/OFF switch,
emergency bu on , reset bu on, electronic electric
circuits, overea ng, insula on failings, or mechanical
damages
- Check bearings clearances
- Check retainers, O'rings, V'rings and other sealings.
VOLTAGE
110V /60Hz
JUICE EXTRACTOR
EX SUPER
69962.6 - ENGLISH
Data de Revisão: 01/07/2021
CLARK AND ASSOCIATES, INC.
OLD PHILADELPHIA PIKE
LANCASTER, PA 17602
USA
Phone: 00 1 717 392 7550
info@clarkinc.biz
THE INFORMATIONS CONTAINED IN THE PRESENT INSTRUCTION MANUAL MAY BE MODIFIED WITHOUT PREVIOUS NOTICE.
MODEL