Setting Angle Of Air Flow - Bosch Climate 5000 Series User Manual

User Manual

2.4 Setting Angle of Air Flow

Setting vertical angle of air fl ow
While the unit is on, use the SWING button to set the direction (vertical angle) of
airfl ow.
1. The horizontal louver will swing up and down automatically when pressing
Swing button. Press again to make it stop.
2. Keep pressing this button more than 2 seconds, the vertical louver swing
function is activated. Press it again to stop the automatic function.
3. If continue to press the SWING button, fi ve diff erent airfl ow directions can
be set. The louver can be move at a certain range each time you press the
button. Press the button until the direction you prefer is reached.
Figure 3
NOTICE:
 Do not keep louver at too vertical an angle for long periods
of time. This can cause water condensation to drip from the
unit
8 |
Setting horizontal angle of air fl ow
While the unit is on, use the SWING button to set the direction (horizontal angle) of
airfl ow
1. The horizontal louver will swing up and down automatically when pressing
Swing button.
2. Press again to make it stop.
Louver angles
When using COOL or DRY mode, do not set louver at too vertical an angle for long
periods of time. This can cause water to condense on the louver blade, which will
drip from the unit.
When using COOL or HEAT mode, setting the louver at too vertical an angle can
reduce the performance of the unit due to restricted air fl ow.
Do not move louver by hand. This will cause the louver to become out of sync. If this
occurs, turn off the unit and unplug it for a few seconds, then restart the unit. This
will reset the louver.
Bosch Climate 5000 Series Wall Mounted Ductless Split Air Conditioner / Heat Pump (06.2022)