Safety; Safety Precautions - Ransburg 9040 Service Manual

9040 Low Voltage Control Unit Kit- Safety

SAFETY

SAFETY PRECAUTIONS

Before operating, maintaining or servicing any
Ransburg electrostatic coating system, read
and understand all of the technical and safety
literature for your Ransburg products. This
manual contains information that is important
for you to know
information relates to USER SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To
help you recognize this information, we use the
following symbols.
attention to these sections.
A WARNING! states information to alert you to
a situation that might cause serious injury if
instructions are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the
procedure in progress.
While this manual lists standard specifications
and service procedures, some minor deviations
may be found between this literature and your
equipment. Differences in local codes and plant
requirements, material delivery requirements, etc.,
make such variations inevitable. Compare this
manual with your system installation drawings and
appropriate Ransburg equipment
manuals to reconcile such differences.
Careful study and continued use of this manual
will provide a better understanding of the
equipment and process, resulting in more
efficient operation, longer trouble-free service
and faster, easier troubleshooting. If you do not
have the manuals and safety literature for your
Ransburg system, contact your local Ransburg
representative or Ransburg.
1
and understand. This
Please pay particular
! W A R N I N G
>
The user MUST read and be familiar with
the Safety Section in this manual and the
Ransburg safety literature therein iden-
tified.
>
This manual MUST be read and thoroughly
understood by ALL personnel who operate,
clean or maintain this equipment! Special care
should be taken to
WARNINGS and safety requirements for
operating and servicing the equipment are
followed. The user should be aware of and
adhere to ALL local building and fire codes
and ordinances as well as NFPA-33 SAFETY
STANDARD or European Norms , prior to
installing, operating, and/or servicing this
equipment.
! W A R N I N G
>
The hazards shown on the following page
may occur during the normal use of this
equipment. Please read the hazard chart
beginning on page 2.
ensure that the
CP-11-01