Installing The Unit; Removing The Unit - Kenwood DMX709S Instruction Manual

Installation and Connection Installation and Connection

Installing the unit

Installing the unit using the mounting
bracket removed from the car
π / [
Note: Select the appropriate screws (supplied) for the
mounting bracket.
* Shape of your car brackets may differ.
Installing the unit using the mounting
sleeve
'
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
Installing the trim plate
π / [

Removing the unit

Car bracket*
1
Remove the trim plate (
two extraction keys (
\
2
]
] ) by inserting the
3
\ ) as illustrated.
]
When the lower level is removed, remove
from the upper two catches of the trim
plate ( ] ).
The frame can be removed from the top side in the
same manner.
Insert the extraction keys ( \
the slots on each side.
\
) deeply into
ENGLISH 55