Using An External Component Via Ads Adapter; Oem Features; Bluetooth® Device - Kenwood DMX709S Instruction Manual

Other External Components Other External Components
Using an external component via ADS
adapter — OEM Features
By connecting this unit to the bus system of the
vehicle using iDatalink (commercially available), this
unit can access the satellite radio source provided for
the vehicle and vehicle information can be displayed
on this unit.
• Displayable screens, key names, and screen names
vary depending on the type of the connected
iDatalink and the model of the vehicle.
• For details, visit <www.idatalink.com/>.
Connecting an ADS adapter
See page 57.
Using an external component via an ADS
adapter
• For settings to use an ADS adapter, see page 50.
1
Select "OEM Features" as the source.
From the Home screen (page 3), touch as
follows:
36 ENGLISH
[Satellite Displays the control screen of the
Radio] satellite radio source provided for the
vehicle.
[Media Displays the control screen of the
Player] media player source provided for the
vehicle.
[TEL] Displays the control screen of the
Bluetooth hands-free function
provided for the vehicle.
[BT Displays the control screen of the
Streaming] Bluetooth streaming function
provided for the vehicle.
[Gauges] Displays the information about the
instruments such as a speedometer.
[Climate] Displays the information about the air
conditioner of the vehicle.
[Parking Displays the information about
Assist] the Parking Distance Sensor of the
vehicle.
[Vehicle Info] Displays the information about the
tire pressures of the vehicle.
[Radar Displays the information about the
Detector] Radar Detector.
2
Select the information you want or the
playback source to play.
• When you select the playback source, turn on
the connected component and start playing the
source.
Bluetooth® Device Bluetooth® Device
You can use the mobile phone and portable audio
player connected through Bluetooth.
• While using Apple CarPlay, Android Auto, or USB
Mirroring, use their features for hands-free phones
and audio playback.
Note
• While driving, do not perform complicated
operations such as dialing numbers, using the phone
book, etc. When you perform these operations, stop
your car in a safe place.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• Some Bluetooth devices may not be used with this
unit depending on the Bluetooth version of the
device.
• When a Bluetooth mobile phone is connected, the
signal strength and battery level are displayed when
the information is acquired from the device.
• If your mobile phone supports PBAP (Phone Book
Access Profile), you can display the following items
on the touch panel when the mobile phone is
connected.
– Phone book
– Dialed calls, received calls, and missed calls (up to
10 entries in total)
• Two devices for Bluetooth mobile phone and one for
Bluetooth audio can be connected at a time.
However, when [Bluetooth Audio] is selected as the
source, you can connect up to five Bluetooth audio
devices and switch between these five devices.