Connections Setting - Kenwood DMX709S Instruction Manual

In-Car Connections In-Car Connections
Deleting the registered devices
1
Display the <Device List> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Setup> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
2
Display the <Device Remove> screen.
On the <Device List> screen:
3
Select the device you want to delete.
Device Remove
All CP Device 1
All
Device 2
Delete
Device 3
AAP Device 1
BT Device 1
• To select all devices, touch [
• To deselect all devices, touch [
4
Touch [Delete].
A warning message appears. Touch [Yes] to delete.
10 ENGLISH

Connections setting

You can change various settings for the connected
devices.
1
Display the <
From the Home screen (page 3), touch as
follows:
Then, on the <Setup> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, you can
change and confirm the following item settings.
• For list/setting screen operations, see also
page 13.
Connections SETUP
Device List
PIN Code
Device Name
Bluetooth Device Address
Initialize
TEL SETUP
].
].
> screen.
Connections SETUP
Enter
0000
(Model name)
00:00:00:00:00:00:00
Enter
Enter
<Device List>
Devices connected for Apple CarPlay, Android
Auto, USB Mirroring, Bluetooth phone, and
Bluetooth audio are listed. You can check their
names and their status on the list (page 9).
<PIN Code>
• To change the PIN code, enter a new PIN code
and touch [Enter] to finish.
• To correct the PIN code input, touch and hold
[Clear], and re-enter the PIN code.
<Device Name>
Shows the device name of this unit to be shown
DMX709S or
on the Bluetooth device —
DMX7709S
.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Initialize the Bluetooth settings (page 50).
<TEL SETUP>
See step 2 on page 39.