Kenwood DMX709S Instruction Manual page 47

Settings Settings
<Front Focus>
When you select 2-way speaker system, you can use
this setting, enabling you to focus the imaginary sound
localization for the seat you select.
1
Select the listening position.
1 Touch [Front Focus].
2 Select from [Front L], [Front R], [Front All
(Priority L)], [Front All (Priority R)], [All
(Priority L)], or [All (Priority R)].
• "Priority" means to which seats (left or right)
the sound localization tends to be shifted.
3 Touch [Adjust].
Position
Listening Position Front Focus
Front L Front R
Front All Front All
Priority L Priority R
All All
Priority L Priority R
Adjust
2
Touch [Distance] (1), and then adjust the
following parameters (2).
Front Focus Adjust
Distance Gain
Sound Image LR(Front)
Sound Image LR(Rear)
0.94ms 0.94ms
Size of the Virtual Sound Field
Subwoofer Delay
0.94ms 0.94ms
Initialize
0.94ms
[Sound Image Locates the sound image in
LR (Front)] front of the front seats, and
adjust the balance.
• You can mute the sounds
of the rear speakers and
subwoofer.
[Sound Image Locates the sound image in
LR (Rear)] front of the rear seats, and
adjust the balance.
[Size of the Adjusts the virtual sound field to
Virtual Sound the desired field size.
Field] • If the sound image moves out
of the front position, adjust
[Sound Image LR (Front)]/
[Sound Image LR (Rear)].
[Subwoofer
Adjusts the delay time of
Delay]
subwoofer sound.
• To close and finish the parameter setting, touch
[Close].
3
Touch [Gain] (1), and then adjust the
sound level of each speaker (2).
Front Focus Adjust
Tweeter
0.0 dB
Front L Front R
0.0 dB 0.0 dB
Rear L Rear R
0.0 dB 0.0 dB
Subwoofer
0.0 dB
To initialize the setting value: Touch [Initialize].
<Volume Offset>
Adjust and store the auto-adjustment volume level for
each source.
The volume level will automatically increase or
decrease when you change the source.
• –5 to +5 (Initial: 0)
ENGLISH 45