Kenwood DMX709S Instruction Manual page 10

In-Car Connections In-Car Connections
Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0)
1
Display the Home screen.
2
Display the <PIN Code Set> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Setup> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<PIN Code> : [Enter]
3
Enter the PIN code.
PIN Code Set
0000
1 2 3
4 5 6
7 8 9
0 Enter Clear
• Initial PIN Code: [0000]
• If you do not need to change the PIN code [0000],
just touch [Enter].
• To change the PIN code, see page 10.
8 ENGLISH
4
Make the unit ready for pairing.
On the <Device List> screen:
Please open Bluetooth settings on your device and
select the device name below
DMXXXXXXX
Cancel
5
Search for the unit ("DMX709S" or
"DMX7709S") from your Bluetooth device.
6
Select the unit ("DMX709S" or
"DMX7709S") on your Bluetooth device.
Pairing is complete.
7
Register the usage of the Bluetooth
device.
• See "Registering the usage of the devices" that
follows.
Registering the usage of the devices
You can confirm and change the usage (profile) of the
registered devices on the <Device List> screen.
• You can also connect/disconnect and delete
unwanted devices on the device list.
1
Display the <Device List> screen.
From the Home screen (page 3), touch as
follows:
Then, on the <Setup> screen, touch as follows:
[System] → <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as
follows:
<Device List> : [Enter]
Device List
Device Name 1
Device Name 2
Device Name 3
Device Name 4
Device Name 5
Device Name 6
The currently activated (connected) devices are
highlighted on the list.
• Six devices can be displayed on the list; five
devices connected by Bluetooth and one by USB.
• You can also use the pop-up function menu to
display the <Device List> screen (page 13).