Step 5. Remove Cutterbar Components - MacDon R80 Manual

STEP 5. REMOVE CUTTERBAR
COMPONENTS
a. Cut banding securing forming shield side
deflectors to cutterbar
components from cutterbar. Set aside for later
installation.
WARNING
Ensure cutterbar is completely clear of
foreign objects.
ejected with considerable force when the
machine is started and may result in
serious injury or machine damage.
b. Thoroughly check cutterbar area for wooden
blocking, banding, and hardware that may
have fallen between discs.
ACCEPTABLE
NOT ACCEPTABLE
c. Close cutterbar doors.
hang properly and
cutterbar area. Minor creases in curtains will
eventually straighten out.
Form # 169080
UNLOADING AND ASSEMBLY
and remove
These objects can be
Ensure that curtains
completely enclose
12
Issue – April 2007