Advertisement
Black & Vintage Brown Wood 47" x 24" Electric Desk
Instruction Manual
SKU: DESK-E144BN
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-e144bn
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo DESK-E144BN
Summary of Contents for Vivo DESK-E144BN
- Page 1 Black & Vintage Brown Wood 47" x 24" Electric Desk Instruction Manual SKU: DESK-E144BN Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-e144bn GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Electrical Safety Instructions
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. -
Page 3: Tools Needed
TOOLS NEEDED Level Phillips Drill Screwdriver ASSEMBLY STEPS STEP 1 Assemble the Left and Right Crossbars (2, 3) to the Legs (4, 5) using M8x47 bolts (B) and tighten with the 5mm Allen Wrench (G). Make sure tabs on either crossbar are facing out as shown below. - Page 4 STEP 2 Place the Side Brackets (8) on the legs as shown, then insert and tighten M6x10 bolts (C) using the 4mm Allen Wrench (I). STEP 3 Assemble Left and Right Crossbars (2, 3) using Crossbar Connector (10) and M6x12 bolts (E) and 4mm Assemble the side brackets (5) to the legs using M6x10 bolts (B) and tighten with the 4mm Allen Allen Wrench (I).
- Page 5 STEP 4 Insert the Sync Rod (6) into the non-motorized Leg (4). Loosen the knob on the sync rod, then extend the rod onto the Leg with Motor (5) and tighten the knob. Tighten the set screw on the end of the sync rod using the 2mm Allen Wrench (H).
- Page 6 STEP 6 Carefully place assembled desk frame upside down ontop of assembled Desktop (1). Secure the frame to the desktop using M5x16 screws (F) and a Phillips screwdriver. STEP 7 Mount the control panel (11) to the desktop (1) using M5x16 screws (F) with a Phillips screwdriver. Connect the AC adapter (12) and motor to the control panel.
- Page 7 STEP 8 Carefully turn the desk right side up and connect the AC adapter (12) to a wall outlet. If necessary, adjust foot pads (A) to level the desk. The desk is now ready for use. Please refer to the Controller User Guide for operating instructions.
- Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-E144BN and is the answer not in the manual?
Questions and answers