CPU PnP Setup Page
This page lets you manually configure the mainboard for the CPU. The system
will automatically detect the kind of CPU that you have installed and make the
appropriate adjustments to the items on this page.
AMIBIOS SETUP – CPU PnP SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
CPU Type
Auto Detect CPU/DRAM Freq
CPU Frequency
CPU Over-Clocking Freq.
CPU/DRAM Frequency Ratio
DRAM Frequency
CPU Ratio
Post Shutdown for CPU Fan
CPU Type/ Frequency Ratio
These items show the type, frequency and ratio the installed CPU in your sys-
tem.
CPU/DRAM Frequency/Ratio
These items decide CPU/DRAM frequency/ratio installed in your system.
CPU Over-Clocking Frequency
This item decides CPU over-clocking frequency installed in your system. If the
over-clocking fails, please shut down the system power. And then, hold the
PageUp key and start the power again; the BIOS will recover the safe default.
Auto Detect CPU/DRAM Freq
When this item is enabled, BIOS will decide the CPU/DRAM frequency in your
system.
Post Shutdown for CPU Fan
When this item is set to Enabled, the system will automatically shut down if
the CPU fan is disconnected with the power.
Intel P4
Enabled
100 MHz
100 MHz
[ 1 : 1 ]
100 MHz
H/W Trap
↑↓←→ : Select Item
ESC : Quit
Disabled
F1
: Help
PU/PD/+/- : Modify
F5
: Old Values (Shift)F2 : Color
F6
: Load Optimal values
F7
: Load Best performance values
35
Need help?
Do you have a question about the P4S8AG and is the answer not in the manual?
Questions and answers