Washing Sequence - Haier HWM100-99VGS User Manual

Washing sequence

Wash timer Wash selector
(To set to below 2 minute, (standard current,
first set to 5 minute then strong current)
turn it back. it can increase
the service life of the timer).
STRONG
OFF
SILK
WOOL
STANDARD
COTTON
LINEN WASH SELECTOR
WASH TIMER
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
9
Buzzer
(The buzzer will ring when
the washing finishes)
OFF
MAX
DRAIN
BUZZER
Water-filling selector
Water-filling entrance
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
SPIN TIMER
WASH SPIN
STRONG
STANDARD
DRAIN
WASH SELECTOR
OFF
SILK
WOOL
COTTON
LINEN
WASH TIMER
STRONG
STANDARD
DRAIN
WASH SELECTOR
Spin timer
OFF
SILK
WOOL
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5