Configure The User Account - TP-Link Omada EAP620 User Manual

5.1 Configure the User Account

Every EAP has a user account, which is used to log in to the management page of the EAP.
When you start the EAP at the first time, the username and password of the user account
are both admin. After the first login, the system will require you to set a new username and
a new password for the user account. And then you can use the new user account to log in
to the EAP. Also, you can change your user account as needed.


iipe
Please remember your user account well. If you forget it, reset the EAP to the factory defaults and
log in with the default user account (username and password are both admin).
To configure the user account, go to System > User Account page.
Follow the steps below to change your user account on this page:
1. Enter the old username and old password of your user account.
2. Specify a new username and a new password for your user account. The system
will automatically detect the strength of your entered password. For security, we
recommend that you set a password with high strength.
3. Retype the new password.
4. Click Save.
76