Table of Contents
Advertisement
5.1 Configure the User Account
Every AP has a user account, which is used to log in to the management page of the AP.
When you start the AP at the first time, the username and password of the user account
are both admin. After the first login, the system will require you to set a new username and
a new password for the user account. And then you can use the new user account to log in
to the AP. Also, you can change your user account as needed.
Tips:
Please remember your user account well. If you forget it, reset the AP to the factory defaults and log
in with the default user account (username and password are both admin).
To configure the user account, go to System > User Account page.
Follow the steps below to change your user account on this page:
1. Enter the old username and old password of your user account.
2. Specify a new username and a new password for your user account. The system
will automatically detect the strength of your entered password. For security, we
recommend that you set a password with high strength.
3. Retype the new password.
4. Click Save.
94
Advertisement
Table of Contents
