Monitor The Radio Settings; Monitor Radio Traffic - TP-Link Omada EAP620 User Manual

Monitor the Radio Settings

You can monitor the radio settings of the EAP. For a dual-band EAP, there are two bands:
2.4GHz and 5GHz. You can click to select a band to view. The following figure posted in the
introduction takes 2.4GHz as an example.
The following table introduces the displayed information of the EAP.
2.4GHz/5GHz
Wireless Radio
Channel Frequency
Channel Width
IEEE802.11 Mode
Max TX Rate
Tx Power

Monitor Radio Traffic

You can monitor the radio traffic of the EAP. For a dual-band EAP, there are two bands:
2.4GHz and 5GHz. You can click to select a band to view. The following figure posted in the
introduction takes 2.4GHz as an example.
Displays whether wireless function is enabled on the radio band.
Displays the channel and frequency which are currently used by the
EAP.
Displays the channel width which is currently used by the EAP.
Displays the IEEE802.11 protocol currently used by the EAP.
Displays the maximum physical rate of the EAP.
Displays the transmit power of the EAP.
56