Table of Contents
Advertisement
the MAC address of the host and click OK. In the same way, you can add more MAC
addresses to the selected MAC group.
3. In the MAC Filtering Association section, configure the filtering rule. For each SSID, you
can select a MAC group in the MAC Group Name column and select the filtering rule
(Allow/Deny) in the Action column. Click Save.
For example, the following configuration means that the hosts in Group 2 are denied to
access the SSID SSID-1 on the 2.4GHz band and allowed to access the SSID SSID-2 on
the 5GHz band.
2.5 Configure Scheduler
With the Scheduler feature, the EAP or its wireless network can automatically turn on or
off at the time you set. For example, you can schedule the radio to operate only during the
office working time to reduce power consumption.
38
Advertisement
Table of Contents
