Monitor The Radio Settings; Monitor Radio Traffic - TP-Link Omada EAP615 User Manual

Monitor the Radio Settings

You can monitor the radio settings of the EAP. The following figure posted in the
introduction takes 2.4GHz as an example.
The following table introduces the displayed information of the EAP.
Wireless Radio
Channel Frequency
Channel Width
IEEE802.11 Mode
Max TX Rate
Tx Power

Monitor Radio Traffic

You can monitor the radio traffic of the EAP. The following figure posted in the introduction
takes 2.4GHz of a dual-band device as an example.
The following traffic information of the radio is displayed:
Rx Packets Displays the total number of the received packets on the current band
since the EAP starts up.
Displays whether wireless function is enabled on the radio band.
Displays the channel and frequency which are currently used by the
EAP.
Displays the channel width which is currently used by the EAP.
Displays the IEEE802.11 protocol currently used by the EAP.
Displays the maximum physical rate of the EAP.
Displays the transmit power of the EAP.
71