Drive Select Lever Operation And Reverse Driving - Yamaha VIKING 2021 Owner's Manual

Do not turn the key to the "
with the engine running; otherwise, damage
to the electric starter may result.
TIP
For maximum engine life, never accelerate
hard when the engine is cold!
EBU31914
Drive select lever operation and re-
verse driving
ECB02151
NOTICE
 Do not shift without coming to a com-
plete stop and waiting for the engine to
return to normal idle speed. Damage to
the engine or drive train may occur.
 Improper gear selection may shorten the
life of V-belt.
Shifting: neutral to high and high to low
1. Stop the vehicle, and take your foot off
the accelerator pedal.
" (start) position
7-3
2. Apply the brake pedal, then shift by mov-
ing the drive select lever along the shift
guide. Make sure that the drive select le-
ver is completely shifted into position.
1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)
3. Release the parking brake, if applied.
4. Release the brake pedal and press the
accelerator pedal gradually.
2
3
4
5
1
7