Drive Select Lever Operation And Reverse Driving - Yamaha WOLVERINE X2 Owner's Manual

TIP
 Engine power is restricted when the engine
is too cold. (See page 5-4.)
 For maximum engine life, never accelerate
hard when the engine is cold!
EBU37950
Drive select lever operation and re-
verse driving
ECB02150
NOTICE
Do not shift without coming to a complete
7
stop and waiting for the engine to return to
normal idle speed. Damage to the engine
or drive train may occur.
Shifting: neutral to high and high to low
1. Stop the vehicle, and take your foot off
the accelerator pedal.
2. Apply the brake pedal, then shift by mov-
ing the drive select lever along the shift
guide. Make sure that the drive select le-
ver is completely shifted into position.
1. Drive select lever
2. L (Low-range)
3. H (High-range)
4. N (Neutral)
5. R (Reverse)
3. Release the parking brake, if applied.
4. Release the brake pedal and press the
accelerator pedal gradually.
7-3
2
1
3
4
5