Table of Contents
Advertisement
o Use the program selection button, to choose the wash program
that you require. The program indicator neons will light, to show
you which wash program you are selecting.
o Select any program option that you want to use (e.g. delay
start).
o Press the Start/pause button and the program indicator light will
start to blink next to the wash program that you have selected.
o After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
o Press the Start/pause button briefly during a wash program, the
wash program will pause.
o Use the program selection button, to choose the wash program
that you require. The program indicator neons will light, to show
you which wash program you are selecting.
o When the Start/pause button is pressed again, the newly
selected wash program will commence.
o After a few seconds, you will hear the appliance commence the
new wash program that you have selected.
o IMPORTANT: You should only change a wash program if the
detergent has not been released into the machine; otherwise
you may get poor wash results.
Pausing a wash program
o If you press the Start/pause button briefly during a wash
program, then the wash program will pause.
o The program indicator light will stop blinking.
o The dishwasher will make an audible noise once a minute, until
the Start/pause button is pressed again.
o When the Start/pause button is pressed again, the originally
selected wash program will restart.
22
Advertisement
Table of Contents
