Replacing The Filters; Filter Replacement Indicator - Philips AC8688 User Manual

Note
• To optimize the lifetime of the
pre-filter, make sure it air dries
completely after cleaning.
• Wash your hands after handling
the filter.
• Make sure the side with the two
clips is pointing towards you,
and that all hooks of the pre-
filter are properly attached to
the air purifier.
7
To reattach the side panel,
mount the panel onto the
bottom of the appliance first
(1). Then, gently push the
panel against the body of the
appliance (2).
8
Put the plug of the air purifier in
the wall outlet.
9
Touch the button to switch on
the appliance.
10
Touch and hold the reset button
for 3 seconds to reset the
pre-filter cleaning time.
11
Wash your hands thoroughly
after installing filters.
EN
42
6 Replacing the
filters
Filter replacement
indicator
This air purifier is equipped with
a filter replacement indicator to
make sure that the air purification
filter is in optimal condition when
the air purifier is operating. When
the filters need to be replaced, the
filter code displays on the screen
(see Filter alert chart) and the filter
replacement alert (
If the filters are not replaced in time,
the air purifier will stop operating
and automatically lock to protect
the air quality in the room. Replace
the filters as soon as possible
according to the filter code.
) lights up.