Getting Started; Installing Filters - Philips AC8688 User Manual

3 Getting started

Installing filters

Remove all packaging of the filters
before using the appliance. Unpack
them and place them into the
appliance described as follows:
Note
• Make sure the air purifier is
unplugged from the electrical
outlet before installing the
filters.
• There is one set of filters on
each side of the appliance.
Each side is equipped with one
pre-filter and one air purification
filter.
• Make sure that you place the
air purification filter in the
appliance first and then the pre-
filter.
• Make sure that the side with
the tag is pointing towards you
when installing filters.
1
Remove all packaging materials
of the air purification filters.
2
Pull the top part of the side
panel to remove it from the
appliance.
3
Press the two clips down and
pull the pre-filter towards you.
4
Put the unpacked air purification
filter back into the appliance.
EN
31