Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
Cordless hedge trimmer
Model
Rated voltage
No-load speed
Stroke rate at no load
Blade length
Cutting capacity
Vibration level (in accordance with EN 62841-1 and EN 62841-
4-2)
Vibration total value
Uncertainty of measurement
Noise emission level (in accordance with EN 62841-1 and EN
62841-4-2)
A-weighted sound pressure
level at the operator's position
Uncertainty
A-weighted sound power level
Uncertainty
Weight without battery pack
Maximum weight
BATTERY AND CHARGER
Model
R18HTR22
Battery pack
RB1820C
Weight
0.43 kg
Charger
RC18115
RB18L13, RB18L26, RB18L15, RB18L15A,
RB18L15B, RB18L20, RB18L20A, RB18L13Z,
Compatible
RB18L25, RB18L25A, RB18L40, RB18L40A,
battery packs
RB18L50, RB18L50A, RB18L90, RB18L90A,
RB18L60, RB18L60A, RB18L30, RB18L30A,
RB1815C, RB1820C, RB1840C, RB1840X
BCL14181H, BCL14183H, BCS618, RC18627,
Compatible
RC18627U, RC18150, RC18150U, RC18120,
chargers
RC18115, RC18118C, BCL1418IV*
*BCL1418IV is compatible for charging in vehicles with 12 V d.c.
outlets.
NOTE: Visit your local special orders desk or contact RYOBI
customer service for replacement parts.
declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
OHT1855R
another. They may be used for a preliminary assessment
of exposure.
18 V d.c.
The declared vibration and noise emission values represent
1350/min
the main applications of the tool. However, if the tool is used
2700 spm
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
55 cm
may differ. These conditions may significantly increase the
22 mm
exposure levels over the total working period. An estimation
of the level of exposure to vibration and noise should take
into account the times when the tool is turned off or when
it is running idle. These conditions may significantly reduce
< 2.5 m/s
2
the exposure level over the total working period.
1.5 m/s
2
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
L
= 81.0 dB (A)
pA
K = 3.0 dB
= 92.0 dB (A)
L
wA
K = 3.0 dB
2.8 kg
3.98 kg
OHT1855R
-
-
-
WARNING! The declared vibration total values and the
Advertisement
Table of Contents
