Cleaning the Front Panel
(Must be removed before washing)
•
Stand on a level surface when
removing the front panel.
Removing the front panel
1
Raise the front panel
to its full extent.
2
Slide the two tabs
(left and right) to the
UNLOCK position.
3
Raise the front panel
to a position slightly
higher than horizontal
and pull to remove.
Cleaning the front panel
•
Gently wash with water and a sponge. (Do not use a scrubbing brush or
other hard cleaning aids).
•
Do not press the front panel too hard when washing. (Excess pressure may
damage the panel).
•
When cleaning with kitchen cleaning fluids (neutral detergents), rinse
thoroughly. (Do not use non neutral detergents)
•
Do not dry the front panel in direct sunlight. (Exposure to direct sunlight may
discolor or deform the panel).
!
Caution
•
Do not touch the metal parts in the
indoor unit after removing the front
panel.
•
LOCK
UNLOCK
•
Do not leave water on the panel
after cleaning. Dry thoroughly to
prevent electric shock.
Fixing the front panel
1
Raise the front panel
horizontally, match the
•
protruding portion on the indoor
unit to the fulcrum and push
into place.
POWER
SLEEP
TIMER
ECONOMY
POWERFUL
Protruding portion
on indoor unit
Fulcrum
2
Slide the two tabs up to the
LOCK
UNLOCK
Lock position. (Click sound)
Note: If the tabs are left in the
*
UNLOCK position, the
front panel will not close.
If the panel does not
close completely, check
the tabs positions and try
again.