Introduction; Introduction Controls - Haier HLC19K2 Owner's Manual

Introduction

Controls
This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
1 POWER
Press to turn on and off the TV.
Press to access the input source mode. Press
repeatedly to change the source to the one
2 INPUT
you want to watch. In the MENU screen, the
INPUT button serves as the ENTER button.
Menu display. Press to access the on-screen
3 MENU
menu display.
Press to adjust the volume. In the MENU screen,
4 VOL +/-
these buttons serve as left/right buttons.
DVD panel controls
DVD
slot
load
INPUT MENU VOL- VOL+
Insert DVD with label
towards back (Silver "shiny"
side facing towards you.)
CH- CH+ POWER
5 CH+/-
6 Power indicator
7 Remote Sensor
STOP:
Press to stop the DVD disc.
PLAY/PAUSE:
Press to play the DVD program disc, and press again
to pause the DVD program.
OPEN/CLOSE:
Press to open the disc tray, and press again to close
the tray.
PREV:
Press to play the previous program.
NEXT:
Press to play the next program.
Introduction
Press to scan through channels. To scan
quickly through channels, press and hold
down either+/-. In the MENU screen these
buttons serve as up/down buttons.
Receivers IR signals from the remote control.
Do not put anything near the sensor, which
may block the remote control signal.
Haier LCD HDTV/DVD EN-4