Table of Contents
Advertisement
-00:00:01
-00:00:01
1
x
1.Time shift time. The time delay to the current program
time.
2.Playback status: It shows the playback status (Play,
Pause, Fast Forward, Rewind).
Play
Pause
3.Playback speed: playback speed can be changed -
1x,2x,4x,8x,16x,32x.
4.Playback position: The playback position is always at
the center of the time bar.
5.Time scale:shows the time in half hour increments.
Note
Time Shift function is only available in DTV
mode.
The maximum recording duration is determined
by the memory size of the USB drive and the signal
resolution. Please use a high-speed USB 2.0 drive
with a minimum of 1GB capacity.
Time shift only supports FAT32 file-system.
Time shift supports more than 4GB recording by
using multi-file storage.
When the maximum recording duration is reached,
the oldest program would be deleted and the
latest program is recorded.
When changing channel or changing input source,
the timeshift would stop automatically.
Time shift record will store the fact of no signal.
Time shift will store the video, audio and data
service. we only support:
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: No limited.
In recording, the data is not guaranteed to be
stored in the disk. If the timeshift playback plays
a corrupted data block, it would show "Data lost"
message to indicate that the current data is not
stored correctly.
Please connect the TV antenna or Cable TV coaxial
cable to the Antenna input on the TV. Then please
complete the channel scan. The Time Shift feature
is available when using your ATSC tuner and QAM
7:00
7:30
7:00
7:30
Fast forward
Fast reverse
cable tuner.
Function Menu Options
A
Press
MENU button and CH+/- button until the
following menu appears on the screen.
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
DPMS
Blue Screen
Function
DCR
Time Setup
Lock
Closed Caption
Default
Function
B
Press
/ ENTER button to enter the menu and
/
button to go up and down to select the
desired option.
C
Press
/ ENTER button to confirm and
/
button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired quality has
been achieved.
Function
Language :Press
/
the OSD.
OSD Timeout : Press
/
/Short and Long to change thetime of the OSD
display.
OSD Transparency : Press
among Low/High and Middle to change the
transparency of the OSD. To select Low, the OSD is
opacity.
Screen Mode : Press
/
Normal/Wide/Zoom and Cinema to change the
display mode(display mode may differ from different
inputs).
DPMS : PC Power Management. When set On, the set
will be put in standby mode automatically if there is
no signal received for 2 minutes.
Blue Screen: Press
/
screen will be in blue after 3 seconds if there is no
signal.
Operation
English
Short
Middle
Normal
On
On
On
CH+/-
Select
EXIT
Back
VOL+/-
button to select language of
button to select Middle
/
button to select
button to select among
button to select On, the
Haier LCD HDTV/DVD
EN-14
Advertisement
Table of Contents
