Function - Haier HLC19K2 Owner's Manual

Operation
Channel Menu Options
Channel menu will appear in main menu only in TV
mode.
A
Press MENU button and
following menu appears on the screen.
Video
Tuner Mode
Channel Scan
Audio
Channel Skip
Channel Labels
Channel
Time Shifting Mode

Function

Lock
Channel
B
Press / ENTER button to enter the menu
and / button to go up and down to select the
desired option.
C
Press / ENTER button to confirm and
/ button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Function
Tuner Mode :Press
Antenna or Cable.
Channel Scan : Press
to scan, press EXIT to cancel.
Video
Status: Scanning...
Analog Channels: 4
Digital Channels: 3
Audio
Channel
Function
Lock
Channel Scan
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
EN-13 Haier LCD HDTV/DVD
/ button until the
Antenna
On
CH+/-
Select EXIT Back
VOL+/-
/ button to select
ENTER
/ button to start
ENTER
Antenna
40%
EXIT Cancel
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip :Press
the submenu, then press
the channel number (eg.2) and press ENTER to
confirm, a mark will be display in the pane as
follows and this channel will be skipped next
time you press
/
button to select the channel
the channel, press ENTER button again.
Video
2 Analog
3 Analog
Audio
4 Analog
5 Analog
Channel
5-1 Digital
6 Analog
7 Analog
Function
8 Analog
Lock
9 Analog
10 Analog
Channel Skip
Channel Labels : Allows you to name the channel
that is selected. Press
the submenu.
Video
Channel Index
Channel Label
Audio
Channel
Function
Lock
Channel Label Set
Then press
/ button to
and
/ button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to confirm.
Time Shifting Mode :
Mode on or off.
A
Set the Time Shifting On, then insert the USB drive in
the USB input.
B
Press PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
/ button to enter
ENTER
select
/ button to
button but you can press digits
. If you want to resume
CH+/-
Select EXIT
ENTER Set Back
VOL+/-
/ button to enter
ENTER
1
CH+/-
Select
EXIT Back
VOL+/-
select Channel Index
To turn the Time Shifting