Page 1
L1510B-A/L15A18-A/L19A18-A/L1912W-A LCD TV/DVD Player Combo USER MANUAL Please read this manual carefully before using this TV set and keep it for future reference.
Page 2
INCLUDED WITH THIS PRODUCT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR SOURCES OF HUMIDITY . DO NOT USE ANY ABRASIVE CLEANSERS WHICH MAY SCRATCH OR DAMAGE THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
Page 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
COMPONENT Setup... VCR Setup... Cable TV Setup... External AV Source Setup... Basic Operating Instructions... Turn on the LCD-TV... Audio Control... Mute... Select the TV Channel You Want ..Picture Mode... Sound Mode... Sleep... INFO... GUIDE... -button... CH.LIST button... FAV.LIST b utton...
Never put the unit in direct sunlight or near heat sources; l Allow enough space for proper ventilation; l Please keep water away from the LCD-TV . If water comes in contact with the LCD-TV, disconnect the power cord from the power source, then wipe the set with a dry soft cloth;...
VOL+ Volume up / Right orientation to adjust the item in the OSD /Press to enter 5. CH- TV channel down / to select the item in the menu TV channel up / to select the item in the menu 6. Power indicator 7.
Connection Options Antenna Input Connect cable or antenna signals to the TV, either direc- tly or through your cable box. HDMI Input Connect to HDMI output of other equipment ANT IN S-VIDEO HDMI S-Video Input Connect S-Video out from an S-Video device to the jacks.
FAVORITE AUDIOLIST Buttons on the remote control Press to turn off the sound. Press again to restore the sound. 2. While in TV mode, press to return to the previous channel 3. Input selection 4. Number buttons EXIT 5. Press to select Stereo,Mono,or SAP mode.
Remote Control Installing Batteries Remove the battery cover. Insert two size AAA batteries matching the +/-polarities of the battery to the +/- marks inside the battery compartment. Precautions Make sure that there is no obstacle between the remote controller and television set. Keep the remote control away from heat sources or humid areas to ensure...
UHF antenna outdoor antenna Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) NOTE: Cables shown are not included with the TV Bronze Wire RF coaxial wire (75 ohm) Turn clockwise to tighten. To improve picture quality in a poor signal area, purchase and install a signal amplifier.
Connection Instructions PC Setup You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector;...
1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
Connection Instructions Cable TV Setup - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
Basic Operating Instructions Turn on the LCD-TV When the POWER is turned on, the indicator light on the front of the LCD-TV changes from off using the power button, the LCD-TV will go into standby mode and the indicator light turns Each time you press the INPUT button, TV, Composite, S-Video,VGA, Component and HDMI will appear on the screen in order.
Basic Operating Instructions Select the TV Channel You Want You can use the number buttons and select TV channels and And you can press the buttons(CH+/CH-) on the remote control or on the panel to make a selection. Picture Mode Press PICTURE button on the remote control for menu display .
Basic Operating Instructions button Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select digital channel “11.1”, press “11”, then press “ ” and “1”; to select analog channel 13.0, press 13 first, then press and 0.(You must press “...
Menu Operations * In this manual, the OSD (On Screen Display) may be differ from your TV These are examples to illustrate the TV's operation. Press INPUT to select the input source. The menu for each source may be different .
Menu Operations Picture Menu Options continued Function: Picture Mode: Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast : Press CH+/CH- button and VOL+/ENTER to confirm, then press VOL+/VOL- to adjust the contrast of the picture.
Menu Operations Audio Menu Options continued You can adjust sound options to the levels you prefer. 2. Press VOL+/ENTER button to enter the Audio menu and CH+/CH- to go up and down to select the desired option . 3.Press VOL+/ENTER button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference .
Page 20
.After the search has finished, program number will display on the screen. the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal. The channels found are...
Page 21
Menu Operations Setup Menu Options Add On Ch Search: When the channels are found, use VOL+/ENTER to add it to the channel list. Manual Ch Set: Press ENTER button to display a channel list that you can select channels as below: Channel Label: Allows you to name the channel that is selected.
Page 22
Time Zone: Press CH+/CH- to select the item and VOL+/ENTER to confirm, then press VOL+/VOL- to select the time zone. Year/Date/Time: Press VOL-/VOL+ to adjust the time. Sleep Timer: Press VOL+/ENTER to select the amount of time before your TV turn off automatically . Time Set...
Page 23
Exit/Menu Exit Enter Old Password Enter Password Parental Control Menu US Ratings Canadian Rating Advanced Rating Move Change Exit/Menu Exit Parental Control Menu MPAA TV RATING NONE ALL FV L S V D NONE TV-Y PG-13 TV-Y7 TV-G NC-17 TV-PG TV-14...
Page 24
NONE: Not Rated-this means that programs are not rated or rating does not apply. TV-Y: For all children - these types of rated programs are designed for a very young audience, including children from ages 2-6. TV-Y7: Directed towards older children - this type of rated programs may include comedic violence of mild physical, or may frighten children under the age of 7.
Page 25
TEXT2 to TEXT4 :For other modes of information displayed by broadcasters. (This blocks a large portion of the picture on your screen). Canadian French 8 ans+ 13 ans+ 16 ans+ 18 ans+ Move Enter Change Exit/Menu Exit on TV means CC MODE is turned on.
Page 26
Select CC2 for secondary language translation such as French or any other language that may be broadcast in your area. Digital TV Captions : Pr Digital Closed Captions: This item allows you to set the closed caption, and press...
Page 27
Menu Operations VGA Menu Options Continued 3.Press VOL+/ENTER button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved . Picture Audio Setup...
Page 28
Menu Operations Component Menu Options 1. Press MENU button and CH+/CH- button to select Feature menu in Component mode. 2. Press VOL+/ENTER button to enter the Feature menu and CH+/CH- to go up and down to select the desired option . 3.Press VOL+/ENTER button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference .
Page 29
Move /Enter Select /Exit/Menu Exit Time Set: Press CH+/CH- button and then VOL+/ENTER button to enter the submenu that allows you to set the time the TV will display. Sleep Timer: Press VOL+/ENTER button to select the amount of the time before your TV turn off automatically.
Page 30
1.If the fault can not be repaired using the above guide consult with your local authorized service center. 2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages levels inside that may be fatal or cause fire.
Humidity Accessories NOTE Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate. L1510B-A/L15A18-A NTSC, ATSC, Cliar QAM 1.5W+1.5W AV input PC input S-VIDEO input PC audio input Headphone output YPbPr input Antenna input...