Introduction; Controls - Haier HLC26R1 Owner's Manual

Controls

This is a simplified representation of the TV front panel, side panel control buttons and side inputs.
TV Side panel controls and connections
1.MENU: Menu display. Press to access the on-screen menu display
2.INPUT: Press to access the input source mode. Press repeatedly to change the source to the one you want to
watch. In the MENU screen, the INPUT button serves as the ENTER button.
3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down
either +/- . In the MENU screen, these buttons serve as up/down buttons.
5.POWER: Press to turn on and off the TV.
6.USB input: Connect a USB flash drive to view JPEG images or listen to MP3 songs.
7.Av2 AUDIO IN: Connect the audio L/R cables from the video signal source to these jacks.
8.AV2 VIDEO IN: Connects the composite video cable from an external signal source to this jack.
9.Headphone jack : Headphone audio output terminal.
10.HDMI IN: Connect a HDMI device to receive digital audio and uncompressed digital video signals.
11. Remote Sensor
DVD panel controls
slot load
DVD
Insert DVD with label towards
back(Silver "shiny" side
facing towards you.)
6 TV LCD-TFT
Receivers IR signals from the remote control.
Do not put anything near the sensor ,which may block the remote control signal.
STOP
Press to stop the DVD
PLAY/PAUSE
Press to play the DVD program
OPEN/CLOSE:
Press to open the disc tray, and press again to close the tray.
PREV
Press to play the previous program.
NEXT
Press to play the next program.
disc .
disc , and press again to pause the DVD program.

Introduction