Function; Function Menu Options - Haier HL Series Owner's Manual

Video
Tuner
Channel Scan
Audio
Channel Skip
Channel Label
Channel

Function

Lock
Channel
B
Press / ENTER button to enter the menu and
/ button to go up and down to select the
desired option.
C
Press / ENTER button to confirm and
/ button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Function
Tuner :Press /
ENTER
or Cable.
Channel Scan : Press
scan, press EXIT to cancel.
Video
Status: Scanning...
Analog Channels: 4
Audio Digital Channels: 3
Channel
Function
Lock
Channel Scan
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip :Press
the submenu, then press
the channel number (eg.2) and press ENTER to
Antenna
Select
/ EXIT Back
button to select Antenna
/ button to start to
ENTER
Antenna
40%
EXIT Cancel
/ button to enter
ENTER
select
/ button to
confirm, a mark will be display in the pane as
follows and this channel will be skipped next
time you press
/
button to select the channel
the channel, press ENTER button again.
Video
2 Analog
3 Analog
Audio
4 Analog
5 Analog
Channel
5-1 Digital
6 Analog
7 Analog
Function
8 Analog
Lock
9 Analog
10 Analog
Channel Skip
Channel Label : Allows you to name the channel
that is selected. Press
the submenu.
Video
Channel Index
Channel Label
Audio
Channel
Function
Lock
Channel Label Set
Then press
/ button to
and
/ button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to confirm.

Function Menu Options

A
Press MENU button and
following menu appears on the screen.
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
Blue Screen
DPMS
Function
Time Setup
Lock Closed Caption
Default
Function
B
Press / ENTER button to enter the menu and
TV LCD-TFT Owner's Manual
Operation
button but you can press digits
. If you want to resume
Select
ENTER Set / EXIT Back
/ button to enter
ENTER
1
Select EXIT
/ Back
select Channel Index
/ button until the
English
Short
Middle
Normal
On
On
/ Select EXIT Back
EN-14
/