Connecting a computer
How to connect
To get the best picture quality, adjust the VGA
graphics card to 1024×768.
Use the TV's VGA or DVI (Digital Visual Interface)
Audio IN port for audio connections, depending on
your computer connector.
If the graphic card on the computer does not
output analog and digital RGB simultaneously,
connect only one of either VGA IN or HDMI IN to
display the VGA on the TV.
If the graphic card on the computer does output
analog and digital RGB simultaneously, set the TV
to either VGA or HDMI; (the other mode is set to
Plug and Play automatically by the TV.)
Then, make the corresponding audio connection.
If using a sound card, adjust the VGA sound as
PC/DVI AUDIO IN
How to use
Turn on the computer and the TV.
Use INPUT on the remote control to select
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in
present, change the
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the
card can not be changed, change the
card or consult the manufacturer of the
Haier LED HDTV
mode. If noise is
mode to another resolution,
Use a DVI cable.
Avoid keeping a fixed image on the TV's screen
for a long period of time. The fixed image may
become permanently imprinted on the screen.
The synchronization input form for Horizontal and
Vertical frequencies is separate.
Cable TV Setup
After subscribing to a cable TV service from a local
provider you can watch cable TV programming. The TV
cannot display TV programming unless a TV tuner
device or cable TV converter box is connected to the TV.
For further information regarding cable TV service,
contact your local cable TV
Connection Option 1
Select 3 or 4 with channel switch on cable box.
Tune the TV channel to the same selected output
channel on cable box.
Select channels at the cable box or with the cable
box remote control.
L -AUDIO- R