Time Shifting Mode - Haier HL24XSL2 Owner's Manual

Operation
Antenna or Cable.
Channel Scan
: Press
Y
to scan, press EXIT to cancel.
Video
Status: Scanning...
Analog Channels: 4
Audio Digital Channels: 3
Channel
Function
Lock
Channel Scan
All channels now available will be automatically
preset in order .After the search has finished, the
first program number will display on the screen. This
search automatically adds only the active channels in
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip
:Press
Y
enter the submenu, then press
select the channel number (eg.2) and press
to
ENTER to confirm, a mark will be display in the
pane as follows and this channel will be skipped
next time you press
digits button to select the channel
resume the channel, press ENTER button again.
Video
2 Analog
3 Analog
Audio
4 Analog
5 Analog
Channel
5-1 Digital
6 Analog
7 Analog
Function
8 Analog
Lock
9 Analog
10 Analog
Channel Skip
Channel Labels
: Allows you to name the
Y
channel that is selected. Press
button to enter the submenu.
EN-13 Haier LED HDTV
/ button to start
VOL+ ENTER
Antenna
40%
EXIT Cancel
/ button to
VOL+ ENTER
CH+/- button
CH+/- button but you can press
. If you want to
CH+/-
Select
ENTER Set EXIT Back
VOL+/-
/
VOL+ ENTER
Video
Channel Index
Channel Label
Audio
Channel
Function
Lock
Channel Label Set
Then press
CH+/- button to
and
VOL+/- button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to confirm.

Time Shifting Mode

Y
Mode on or off.
A
Set the Time Shifting On, then insert the USB drive in
the USB input.
B
PLAY/PAUSE to play or pause the program. If
Press
you want to stop time shift function, press the STOP
button.
-00:00:01
-00:00:01
1
x
1.Time shift time. The time delay to the current program
time.
2.Playback status: It shows the playback status (Play,
Pause, Fast Forward, Rewind).
Play
4
Pause
3.Playback speed: playback speed can be changed -
1x,2x,4x,8x,16x,32x.
4.Playback position: The playback position is always at the
center of the time bar.
5.Time scale:shows the time in half hour increments.
Note
Time Shift function is only available in DTV
R
mode.
The maximum recording duration is determined
R
by the memory size of the USB drive and the signal
resolution. Please use a high-speed USB 2.0 drive
with a minimum of 1GB capacity.
Time shift only supports FAT32 file-system.
R
Time shift supports more than 4GB recording by
R
using multi-file storage.
1
CH+/-
Select
EXIT Back
VOL+/-
select Channel Index
:
To turn the Time Shifting
7:00 7:30
7:00 7:30
Fast forward
Fast reverse