Anc Data Control; Figure 4-9: Vistalink - Anc Data Control Tab - evertz 7882DEC-H264HD-IPASI User Manual

7882DEC-H264HD-IPASI
HD/SD MPEG-2 and H.264 Decoder
Data Output: This parameter allows the user to enable data output from the decoder.
Destination IP Address: This parameter allows the user to set the destination IP address of the
output data.
Destination Port: This parameter allows the user to set the destination port number of the output
data.
Channel Destination Select
Channel <1-16> Source Select: This parameter allows the user to specify which decoded audio
channel to use for each source.
4.7.

ANC DATA CONTROL

CC Controls
CC Selection: This parameter allows the user to select if Closed Caption 608/708/Divicom should be
embedded on the decoded output. In Auto mode, it will automatically pick the correct CC type in the
decoded transport stream. Other options include SCTE128 and disabled.
CC708 Insert Line: This parameter allows the user to select the line on which to insert the CC708 for
ANC services.
AFD Controls
AFD SD Insert Line: This parameter allows the user to select the AFD insertion lines for SD video.
AFD SD Embed Enable: This parameter allows the user to enable AFD in the output for SD video.
Page - 24
Figure 4-9: VistaLINK
Revision 1.0
- ANC Data Control Tab
®
VLPRO INTERFACE