Buttons On The Operation Panel - SAESHIN Implant XCUBE Instruction Manual

BUTTONS ON THE OPERATION PANEL

Program button
: Use for selecting the set program number. (+) button for 1 stage up and (-) button
for 1 stage down.
Speed button
: Use for setting the speed (RPM).
(+) button for 1 stage up and (-) button for 1 stage down. Keep pressing speed button
to change the stage rapidly.
* The setting range of speed is different from the gear ratio.
Torque button
: Use for setting the torque according to the various use such as drilling or tapping.
(+) button for 1 stage up and (-) button for 1 stage down.
* The setting range of torque is different from the gear ratio.
Memory button
: Keep pressing memory button after completed setting. Then the condition is memorized
with beep sound.
Gear ratio button
: Use for setting the gear ratio of the angle handpiece.
Operation direction button
: Use for selecting the forward or reverse direction. The beep sound is heard during
rotation in reverse direction.
Irrigation pump button
: Use for setting the irrigation volume in 5 levels (from 0 to 75ml).
Irrigation level
0
1
2
3
4
Water Pump
0 ml/min
abt. 45 ml/min ±20%
abt. 55 ml/min ±20%
abt. 65 ml/min ±20%
abt. 75 ml/min ±20%
14