Setting & Operation - SAESHIN Oz Instruction Manual

SETTING & OPERATION
Warning
1
Check the power of the control box is OFF.
A- Connect the power cord.
B- Connect the foot control pedal to the foot pedal connector.
C- Connect the handpiece to the handpiece connector.
2
Put the speed control dial of the control box at "0".
3
Check the well-locked collet chuck turning the handpiece handle or pulling out the bur.
4
Hold the handpiece with one hand and turn on the control box power with the other hand.
5
Please set the time on the digital display. Please set the hour
with the left button and minute with the right button. There is no
need to reset the time after turning on again. Hour display is
shown from 01 to 24.
6
Select whether controlling by hand or foot by pressing the HAND/FOOT button.
Each pushing, it changes Hand or Foot.
7
Choose the rotation direction by pressing the RIGHT/LEFT button. Each pushing, it
changes Right and Left.
8
Use the motor ON/OFF button for running or stopping by hand or foot.
Please make sure that power is off! (Otherwise, it might cause
malfunction).
POWER ON ( I )
Turn on the power switch.
With bipper sound, it lights green on the power switch and shows the numbers on
the rpm display box.
POWER OFF ( O )
The green light on the power switch and the lights of the buttons are gone off.
The number of the rpm display box is dissapeared.