Installation Tasks: Web Conferencing In An Sma-2S Configuration; Copying Guids From The Internal Web Server To The External Web Server - Cisco Unified MeetingPlace Web Conferencing Installation And Upgrade Manual

Release 6.x
Table of Contents

Advertisement

Chapter 3
Installing Web Conferencing for a Segmented Meeting Access Configuration
7.
Installation Tasks: Web Conferencing in an SMA-2S
Configuration
1.
2.
3.
4.
5.
6.
7.

Copying GUIDS from the Internal Web Server to the External Web Server

The GUIDS entries for site and system must match between the internal and external web servers. Make
sure that you run the GUIDS.reg file on each external web server before installing Cisco Unified
MeetingPlace Web Conferencing.
To Copy GUIDS from the Internal Web Server to the External Web Server
Copy the GUIDS.reg file from the internal web server (located in the Program
Step 1
Files\Cisco Systems\MPWeb directory).
Paste the GUIDS.reg file to the Temp directory on the external web server.
Step 2
On the external web server, double-click the GUIDS.reg file to install it.
Step 3
When prompted to add the information from the GUIDS.reg file to the registry, click OK.
Step 4
OL-13418-01
Gather the values needed for the installation of the external server. This must be a Cisco MCS in a
network segment, such as a DMZ. See the
section on page
2-3.
Install the operating system on the internal web server. See the
the Cisco MCS Server" section on page
Configure network settings on the internal web server. See the
the Cisco MCS Server" section on page
Install the Web Conferencing software on the internal web server. For Server Location, choose
Internal (Full Access). See the
Install the operating system on the external web server. See the
the Cisco MCS Server" section on page
Configure network settings on the external web server. See the
the Cisco MCS Server" section on page
Copy the GUIDS from the internal web server to the external server, and run the file on the external
server to install registry entries. See the
External Web Server" section on page
Install the Web Conferencing software on the external web server. For Server Location, choose
External (Limited Access). See the
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x

Installation Tasks: Web Conferencing in an SMA-2S Configuration

"Gathering Web Conferencing Installation Values"
2-5.
2-5.
"Installing Web Conferencing" section on page
2-5.
2-5.
"Copying GUIDS from the Internal Web Server to the
3-5.
"Installing Web Conferencing" section on page
"Installing the Operating System on
"Configuring Network Settings on
2-9.
"Installing the Operating System on
"Configuring Network Settings on
2-9.
3-5

Advertisement

Table of Contents
loading

Table of Contents