Installation Tasks: Web Conferencing
One NIC enabled and configured with two IP addresses;
second NIC is disabled
Both NICs enabled, one IP address per NIC
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x
2-6
Chapter 2
Only utilizes one of the two NICs on the
•
system.
The NIC is a single point of failure.
•
This configuration is available for both HP
•
and IBM MCS server models
•
To configure this option, perform the
Configure a Single NIC with Both IP
Addresses on the Cisco MCS Server"
procedure on page
2-7.
Each NIC on the system is used, although one
•
NIC may be more heavily used than the other.
Each NIC is a single point of failure. If either
•
NIC fails, Web Conferencing will be
unavailable.
If the Web Conferencing server is connected
•
to a 100 MB/sec. network, the NIC capacity
may be exceeded in large meetings with
heavy application sharing.
This configuration is available for both HP
•
and IBM MCS server models.
To configure this option, perform the
•
Configure One IP Address per NIC on the
Cisco MCS Server" procedure on page
Installing Web Conferencing
"To
"To
2-8.
OL-13418-01