Convection Cooking; Other Convenient Functions - Sharp R-9320G-BS Operation Manual

Microwave oven with grill and convection 1100w

Hide thumbs

Table Of Contents

Table of Contents

Notes :

1. The cooking time cannot be input until the preheating temperature arrives. When the oven arrives

at desired temperature, the door must be opened to input the cooking time.

2. The convection heater will stop automatically; if there is no input of the cooking time within 5 min-

utes. An audible signal will sound fi ve times to remind you and the LED will display the time of day, if

the clock has been set. If the clock has not been set, the display will only show "0:00".

3. When the oven is preheating, the turntable should remain in the oven. During preheating and con-

vection cooking, you will hear the cooling fan cycling on and off . This is completely normal and does

not aff ect the cooking.

4. Food manufacturers instructions are only a guideline, so cooking times may need to be adjusted

5. After cooking is complete the cooling fan will continue working for a short time to lower the tem-

perature of the electrical and mechanical parts.

6. You may detect smoke or a burning smell when using convection for the fi rst time. This is normal

and is not a sign that the oven has malfunctioned. To avoid this problem, when fi rst using the oven,

heat the oven without food for 20 minutes on grill and then convection at 230ºC.

IMPORTANT: During operation, to allow smoke or smells to disperse open a window.

WARNING:

The door, outer cabinet, oven cavity and accessories will become very hot during

operation. To prevent burns, always use thick oven gloves.

1. SEQUENCE COOKING

This function quickly defrosts food while enabling you to choose a suitable defrost period, depending

on the food type. Follow the example below for details on how to operate this function. The time range

is 0:05-99:99. This function allows you to cook using up to 4 diff erent stages which can include manual

cooking time or time defrost as well as weight defrost function. Once programmed there is no need to

interfere with the cooking operation as the oven will automatically move onto the next stage. An audi-

ble signal will sound once after the fi rst stage. If one chosen stage is defrosting, this should be the fi rst

stage of sequence cooking.

Note: AUTO MENU cannot be set as one of the multiple sequences.

Example: If you want to defrost meat for 0.1kg, then to cook with 880W microwave power

for 7 minutes. The steps are as follows:

- 1. Press the DEFROST button once, in the LED display DEFROST MINCE PRESS START will flash.

- 2. Press the START/+30sec. button to confirm the menu.

- 3. Enter the defrosting weight by pressing the

- 4. Press the MICROWAVE WATTAGE button once.

- 5. I nput the power level by pressing the MICROWAVE WATTAGE

- 6. Press the START/+30sec. button to confirm the power.

- 7. Enter the cooking time by pressing the

- 8. Press the START/+30sec. button to start cooking.

2. +30sec FUNCTION (Direct start)

The START/+30sec. button allows you to operate the following function: