Safety Decals; Safety Icons; Installation - Ferris SNAPPER PRO EZ Dump Operator's Manual

Grass collection systems
Table of Contents

Advertisement

WARNING
• Check the collection system to make sure it is bolted
tightly to the rider.
WARNING
• When blower assembly is removed from the mower
deck, the deflector must be properly installed.
WARNING
Amputation and thrown objects hazard
If the mower stalls or the turbo blower chute plugs:
1. Disengage the blower (blades) and remove the ignition
key and wait for all parts to stop before disconnecting
or unlatching any parts attached to the blower or the
collection system.
2. Remove the foreign object or clear the chute with a
suitable tool, such as a broom handle, before restarting
the engine. NEVER place hands into the blower
housing to clear jammed objects. Blower may rotate
when object is removed.
WARNING
For added rider stability and to prevent tipping or loss of
control:
• Use reduced speed on uneven ground and when
turning corners.
• Reduce loads on hillsides. It is recommended that the
collection system be kept no more than half full when
negotiating any slopes. Start mowing on slopes when
the collection system is empty.

Safety Decals

Before operating your unit, read the safety decals. The
cautions and warnings are for your safety. To avoid a
personal injury or damage to the unit, understand and follow
all the safety decals.
WARNING
If any safety decals become worn or damaged and cannot
be read, order replacement decals from your dealer.
4
A.
Part Number: 5104315 - Decal, Container, Icons

Safety Icons

Warning - Thrown objects hazard: 
• Do not open collection system container with engine
running. 
• Do not operate with blower or collection system tube
unlatched or missing. 
• Operate only with both the entire collection system and
front counterbalance weights installed and the collection
system closed and latched. 
Warning - Loss of traction and control hazard: 
• Do not operate with only the collection system installed. 
• Do not operate with only the front counter balance
weights installed. 
• Operate only with both the entire collection system and
front counter balance weights installed and the collection
system closed and latched. 

Installation

In addition to these installation instructions, perform the
installation instructions for the blower and blower mount that
are detailed in the blower's operators manual included with
the blower mount.
ferrismowers.com | snapper.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Snapper pro ez dump xl

Table of Contents