Mount The System To The Rack - Cisco SCE 2000 4/8xFE Quick Start Manual

Attach the Crossrail Supports to the Rack
Figure 5: Attaching the Crossrails to the Rack
Step 1 Align the crossrail supports with the side of the rack, parallel to the floor.
Insert and tighten two screws to the front posts or mounting strips of the rack
Step 2
Insert and tighten two screws to the Back posts of the rack.
Step 3
Repeat steps 2 and 3 on the other side of the rack, keeping the brackets flush against the posts and parallel to the
Step 4
supporting bracket on first side of the rack.

Mount the System to the Rack

When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the rack.
Figure 6: Sliding the SCE Platform into the Rack
Step 1 Make sure that the rack brakes are locked or that the rack is otherwise stabilized.
Position the SCE 2000 so that the front end is closest to you, and lift it carefully to place it into the rack. To
Step 2
prevent injury, avoid sudden twists or moves.
9