Cisco SCE 2000 4/8xFE Quick Start Manual page 10

Cisco systems sce 2000 platform quick start guide

Hide thumbs Also See for SCE 2000 4/8xFE:

Table of Contents

Step 3

Slide the SCE 2000 into the rack, pushing it back until the brackets (installed at the front of the SCE 2000) meet

the mounting strips or posts on both sides of the rack.

A rack with both front and back posts will have the crossrail supports installed. Slide the SCE 2000 onto these crossrails

and push it all the way back.

While keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the

Step 4

holes on the rack or mounting strip.

Figure 7: Securing the SCE Platform to the Rack

Step 5

For each bracket, insert and tighten two appropriate screws to the rack.

Note

Since the brackets support the weight of the entire SCE 2000 chassis, be sure to use all four screws to fasten the two rack-

mount brackets to the rack posts.

Table of Contents

Sce 1000