Table of Contents
Advertisement
43-726.fm Page 11 Tuesday, June 15, 1999 8:36 AM
1. Set
to
DIAL MODE
2. Lift the handset and listen for a dial
tone.
Press any number other than
Note: If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code number either.
If the dial tone stops, you have
touch-tone service. Leave
set to
.
MODE
T
If the dial tone continues, you have
pulse service. Set
(pulse).
3. Press
or place the handset on
TALK
the base to hang up.
TURNING THE BASE'S
RINGER ON AND OFF
To turn off the base's ringer, set
on the back of the base to
still make or receive calls using this
phone. Telephones on the same line
(tone).
(and the TAD's handset if it is away from
T
the base) still ring when there is an in-
coming call.
.
0
To turn on the base's ringer, set
to
SETTING THE RINGER
TONE/VOLUME
DIAL
You can select one of four different ring-
er tone/volume settings while the phone
is not in the talk mode.
to
DIAL MODE
P
Press
to the ringer level setting.
RINGER
. You can
OFF
.
ON
or
to increase or decrease
RINGER
11
Advertisement
Table of Contents
