Turning Talking Caller Id On/Off; Installing The Charger - Radio Shack 43-140 Owner's Manual

The.Basics
Turning.Talking.Caller.ID.On/Off
Your new phone comes with a feature
called Talking Caller ID. If you subscribe
to Caller ID services from your telephone
provider and when this feature is turned
on, your base unit will announce the
name of the incoming caller when you
receive a call. You can turn this feature
on or off by moving the TALKINg
CALLER ID ON/OFF switch to the on or
off position as desired.
Your phone will only be able to announce the
NOTE incoming caller names when that information is
available for that call. If a private caller rings you, the
announcement will say Private Caller.
Installing.the.Charger
You can power the charger using the supplied 9V, 210mA AC
adapter.
1. Insert the supplied AC
adapter's barrel plug into
the DC IN 9V jack on the
bottom of the charger.
2. Route the cord through
the strain relief slot and
plug the adapter into a
standard AC outlet.
3. Before using your handset, you must charge the battery pack
for about 15-20 hours.
Place the cordless handset on the charger face forward
to charge the battery pack. The CHARgE indicator on the
charger lights.
UC044ZH_43-140_OM5.indd 20
0
12/18/2006 3:33:55 PM