Page 1
43-788.fm Page 1 Monday, August 16, 1999 8:19 AM Cat. No. 43-788 OWNER’S MANUAL Please read before using this equipment. TAD-1028 Digital Answering System Telephone with Time/Day Voice Stamp...
Memory Backup — protects messages in case of a power failure. Adjustable Ring Selection — lets you set the TAD-1028 to answer the tele- phone after two, four, or seven rings. Toll Saver — lets you avoid unneces- sary long-distance charges when you call long distance to check your mes- sages.
43-788.fm Page 3 Monday, August 16, 1999 8:19 AM Phone Pickup Detection — automati- cally stops the TAD-1028 and resets it if you answer a call after the TAD an- swers. Memo Recording — lets you leave memos as messages on the TAD-1028.
TAD might not answer. If ringer operation is impaired, remove a device from the line. FCC STATEMENT Your TAD-1028 complies with Part 68 of FCC Rules . You must, upon request, provide the FCC registration number and the REN to your telephone compa- ny.
Using the Phone Number Index Card ... 15 Answering System Operation ... 16 Recording the Outgoing Message ... 16 Setting the Number of Rings ... 16 Setting the TAD-1028 to Answer Calls ... 17 Recording Incoming Messages ... 17 Screening Calls ... 17 Playing Messages ... 18 Deleting Messages ...
BATTERY The TAD requires AC power to operate. However, if AC power fails or you un- plug the TAD-1028, a 9-volt backup bat- tery (not supplied) saves the messages and the settings for the day, time, and remote operation security code. We recommend you use an alkaline battery, such as RadioShack Cat.
Page 7
Caution: The supplied adapter sup- plies 9 volts AC, delivers at least 440 milliamps, and has a plug which proper- ly fits the TAD-1028’s AC 9V 440mA jack. Using an adapter that does not meet these specifications might dam- age the TAD or the adapter.
Page 8
PLAY/SKIP indicator flashes rap- idly (until you record the outgoing message), the ANSWER indicator flashes (if you did not install a backup battery), and the TAD-1028 automatically runs a self-test for about 10 seconds. You cannot operate the TAD during this test.
Page 9
PLAY/SKIP indicator flashes rap- idly (until you record the outgoing message), the ANSWER indicator flashes (if you did not install a backup battery), and the TAD-1028 automatically runs a self-test for about 10 seconds. When the test is complete, the TAD-1028 beeps once and announces, “Answer off.”...
Page 10
43-788.fm Page 10 Monday, August 16, 1999 8:19 AM 3. Route the cord into the groove on the phone’s base. Illus. showing routing of modular cord. 4. Plug one end of the supplied coiled cord into the jack on the bottom of the base and route the cord into the groove beside the jack.
Page 11
PLAY/SKIP indicator flashes rap- idly (until you record the outgoing message), the ANSWER indicator flashes (if you did not install a backup battery), and the TAD-1028 automatically runs a self-test for about 10 seconds. When the test is complete, the TAD-1028 beeps...
See “Installing a Backup Bat- tery” on Page 6. • If you do not complete each step within 8 seconds, the TAD-1028 sounds a three-tone beep and stops setting the day and time. Start again at Step 1.
OGM/REPEAT ward or to move forward PLAY/SKIP to the desired hour. 5. Press ANSWER/STOP/DELETE TAD-1028 beeps once and an- nounces the minutes. 6. To change the minutes, repeatedly press to move back- OGM/REPEAT ward or to move forward PLAY/SKIP to the desired minute.
43-788.fm Page 14 Monday, August 16, 1999 8:19 AM TELEPHONE OPERATION Make and answer phone calls on the TAD-1028 as you would with any other phone. Read this section to learn about the phone’s special features. SETTING THE HANDSET VOLUME The handset’s volume control lets you...
43-788.fm Page 15 Monday, August 16, 1999 8:19 AM USING THE PHONE NUMBER INDEX CARD Use a straightened paper clip or anoth- er small pointed object to lift the plastic cover off the phone number index card. Write your phone number at the top and other important names and numbers below it.
43-788.fm Page 16 Monday, August 16, 1999 8:19 AM ANSWERING SYSTEM OPERATION RECORDING THE OUTGOING MESSAGE Before you can set the TAD-1028 to an- swer calls and record messages, you must record the outgoing message (OGM) the caller hears when the TAD answers a call.
TAD-1028 answers so you can avoid unnecessary long- distance charges. SETTING THE TAD-1028 TO ANSWER CALLS To set the TAD-1028 to answer calls, press ANSWER/STOP/DELETE • If an outgoing message is re- corded, the TAD-1028 announces, “Answer on,”...
43-788.fm Page 18 Monday, August 16, 1999 8:19 AM If you do not want to take the call, just let the TAD-1028 finish recording the call- er’s message. PLAYING MESSAGES If there are new messages, the PLAY/ SKIP indicator flashes until all the new messages have been played.
(see “Remote Operation” on Page 21). RECORDING A MEMO A memo is a message you can record at the TAD-1028, without having to call in on a phone. Notes: • The maximum memo length is 60 seconds.
Page 20
Illus. showing CODE switch. 2. Repeatedly press PLAY/SKIP to set the first digit, OGM/REPEAT then press ANSWER/STOP/ . The TAD-1028 beeps and DELETE announces the second digit. 3. Repeatedly press PLAY/SKIP to set the second OGM/REPEAT digit, then press ANSWER/STOP/ .
• The TAD-1028 sounds a 3-tone beep if you press a wrong button. 1. Dial your phone number. • If the TAD-1028 is set to answer- off and an outgoing message is recorded, it answers the call after 10 rings and announces, “Answer off.”...
When you fin- ish, press 0. The TAD repeats the OGM. Play all the recorded messages. Delete all old messages. Set the TAD-1028 to answer or not answer calls. After you press (to play all messages): Press: Delete the current message.
43-788.fm Page 23 Monday, August 16, 1999 8:19 AM TROUBLESHOOTING If you have problems using your TAD-1028, try the suggestions in this section. If you still have problems, contact your local RadioShack store for assistance. Problem The incoming message is incomplete.
TAD’s warranty and void your FCC authorization to operate it. If your TAD-1028 is not performing as it should, take it to your local Ra- dioShack store for assistance. If the trouble is affecting the telephone lines, the phone company can ask you to disconnect your TAD until you have resolved the problem.
Also, the telephone company can make changes to its lines, equipment, opera- tions, or procedures that could affect the operation of this TAD-1028. The telephone company notifies you of these changes in advance so you can take the necessary steps to prevent in- terruption of your telephone service.
Page 26
43-788.fm Page 26 Monday, August 16, 1999 8:19 AM NOTES...
Page 28
43-788.fm Page 28 Monday, August 16, 1999 8:19 AM Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman- ship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers.
Need help?
Do you have a question about the TAD-1028 and is the answer not in the manual?
Questions and answers