Caller Id Operation; Reviewing Caller Id Records - Radio Shack TAD-726 Owner's Manual

43-726.fm Page 22 Tuesday, June 15, 1999 8:36 AM

CALLER ID OPERATION

If you subscribe to Caller ID service from
your phone company, the phone compa-
ny sends information about the call, as
well as the time and date, between the
first and second rings of every call you
receive.
The TAD-726 displays this information
when it receives a call, and it stores up
to 50 Caller ID records for later review. It
also shows if caller information is un-
available or if the name and number
were blocked by the caller (see "Caller
ID Messages" on Page 23).
If you subscribe to Call Waiting with
Caller ID, you will hear a tone through
the handset when a call comes in, then
the Caller ID record appears. If you want
to answer the incoming call, press
. To resume the previous phone
FLASH
conversation, press
FLASH
If the TAD-726's Caller ID memory be-
comes full, any new call replaces the
oldest call's record.
REVIEWING CALLER ID
RECORDS
To review the Caller ID records, lift the
handset and press
CALL ID
of new Caller ID records, if any, and the
total number of records appear.
Note: If the handset is faceup on the
base, it shows the number of Caller ID
records, so you can see if you have new
records to review.
22
Repeatedly press
the Caller ID records from the newest to
the oldest, or
the records. To scroll quickly through the
records, hold down
When you scroll past the last record,
End
scroll past the first record, the record to-
tal appears.
The top line of each record shows the
date, time and the number of calls from
that number. The second line shows the
caller's name, and the third line shows
the caller's phone number.
again.
. The number
to scroll through
to scroll back through
or
appears on the display. When you
.