SRAM RockShox DebonAir Upgrade Manual page 36

4 Inject 10 mL of suspension oil into the lower leg through the bottom Inject 10 mL of suspension oil into the lower leg through the bottom
bolt hole. bolt hole.
Do not exceed the recommended oil volume per leg as this can
damage the fork.
5 Slide the lower leg assembly onto the upper tube until it stops. Slide the lower leg assembly onto the upper tube until it stops.
The spring shaft should be visible and centered in the bottom bolt hole. The spring shaft should be visible and centered in the bottom bolt hole.
Verify the shaft is centered and seated in the lower leg shaft/bolt hole Verify the shaft is centered and seated in the lower leg shaft/bolt hole
and no gap is visible between the lower leg and the shaft end. and no gap is visible between the lower leg and the shaft end.
6 Install the black bottom bolt into the shaft and tighten it to the specified Install the black bottom bolt into the shaft and tighten it to the specified
torque. torque.
7 Clean the entire fork. Clean the entire fork.
Remove the fork from the bicycle work stand and set it aside. Remove the fork from the bicycle work stand and set it aside.
NOTI CE
PLUSH Light RockShox Bleed Syringe
Spring Side
5 mm Spring Side
10 mL
5 mm 7.3 N·m (65 in-lb)
36
Lower Leg Installation